Current Waratah Harvesting-Processing-Heads 600 Series 3 And 4 Roller

2020 Waratah 600 Series 3 And 4 Roller HTH623C

2020 Waratah 600 Series 3 And 4 Roller HTH623C

Swipe to View More

  • Year 2020
  • Make Waratah
  • Model 600 Series 3 And 4 Roller
Shop Waratah Pre-Owned
Product Details Specifications Photos
2020 Waratah 600 Series 3 And 4 Roller HTH623C

2020 Waratah 600 Series 3 And 4 Roller HTH623C

  • Year 2020
  • Manufacturer Waratah
  • Model Name 600 Series 3 And 4 Roller
  • Trim Name HTH623C
  • Generic Type (Primary) General
  • Displacement Saw type: 3/4 cc | Motor 1: 837 cc / 500 cc | Motor 2: 1048 cc / 630 cc

2020 Waratah 600 Series 3 And 4 Roller HTH623C

Power. Torque. Speed. With its large, high-torque feed motors, delimbing power, and great balance of feed speed, the HTH623C is born to perform with a 25-ton carrier.

Its hydraulic design provides high-flow characteristics combined with low-pressure drop — for increased performance in any application and the toughest conditions.

Engine

Displacement Saw type: 3/4 cc | Motor 1: 837 cc / 500 cc | Motor 2: 1048 cc / 630 cc

Operational

Operating Speed Motor 1 Feed — maximum flow: 17 ft/sec (5.2 m/sec) | Motor 2 Feed — maximum flow: 15.1 ft/sec (4.6 m/sec)

Dimensions

Chain Type and Bar: 26 in (64 cm)
Dimensions Maximum feed roller opening: 34 in (875) | Butt Saw Maximum cutting: 30 in (750 mm) | Bar: 35 in (900mm) | Top Saw Maximum cutting: 18 in (45 cm) | Maximum delimb: 28 in / 35 in (700 mm / 885 mm)
Width Maximum: 79 in (200 cm)

Features

Features Saw type: Waratah 3/4 | Saw limiting: Available with SuperCut 100 | Top knives: 1 floating, 2 moving | Bottom knives: 1 fixed

Product Photography