The CF-790 canal finisher has welded steel tubular lattice-type upper structure with end-car mounted crawler tracks. The finisher sub-frame is made up of welded high strength steel lattice panels, with pin-connected sections providing fast setup time and the versatility to fit exact job requirements for frame widths up to 72 feet (21.95 meter). Bottom wedge assemblies allow the CF-790 to accommodate slopes from 4:1 to 1:1. The finisher bottom frame can be partially disassembled, and the remaining slope frames along with the finishing carriages can be winched up under the upper structure for moving in and out of canals.
The CF-790 has two single cylinder finishing carriages equipped with mounted or independent augers. Optional externally vibrated undercarriages or trimming undercarriages are available as needed. The CF-790 can be equipped with frame-mounted slipforms with adjustable framework across the rear of the slipforms for controlling the finished slab width and providing data to hand finish the top cap.
|Msrp:||Request a Quote|
|Track Pad Width:||15.75 in. (400 mm)|
|Tracks:||Length: 11 ft. 8 in. (3.56 m)Center-to-Center Sprocket / Idler Length: 9 ft. 11 in. (3.02 m)|
|Weight:||49 ft. (14.94 m) Unit: 42,900 lbs. (19,459.4 kg) 72 ft. (21.9 m) Unit: 47,476 lbs. (21,535.1 kg)|
|Horsepower:||83 hp (61.92 kW) @ 2,200 rpm|
|Displacement:||269 ci (4.41 l)|
|Fuel Tank Capacity:||33 gal. (124.9 l)|
|Tracked or Wheeled:||Tracked|
|Frame:||All-welded steel, pin-connected main frameWidth: Up to 72 ft. (21.95 m)|
|Paving Speed:||Variable up to 16.7 fpm (5.09 m/min.)|
|Travel Speed:||Variable up to 50.44 fpm (15.37 m/min.)|