2020 Waratah 600 Series 3 And 4 Roller HTH624C 4x4

Information

2020 Waratah 600 Series 3 And 4 Roller HTH624C 4x4

Born to perform. With it’s effortless four wheel drive, and high torque feed motors, the H624C 4X4 provides unyielding delimbing power, and responsive feed speeds.

It’s productivity enhanced design couples an extra capacity top saw with 360 rotation, and lower delimb- emphasizing efficient and responsive log handling, precision placement, and control.

Include our accurate TimberRite measuring system, and you’ll have a wealth of data and information at your command — which means you can run your business smarter and more efficiently than ever before.

Photos

Highlights

  • TN AR, Mississippi
  • 2020
  • Waratah
  • 600 Series 3 And 4 Roller HTH624C 4x4
  • Available
  • Maximum: 200 cm (79 in)

Specifications

  • 2020
  • Waratah
  • 600 Series 3 And 4 Roller
  • HTH624C 4x4
  • General
  • Motor 1 (drive, fixed): 837 cc/500 cc | Motor 2 (drive, fixed): 1048 cc/630 cc | Saw Motor: 50 cc | Top saw motor: 20 cc
  • Motor 1 Maximum feed: 17 ft/s (5.2 m/sec) | Motor 1 Maximum feed 2: 15.1 ft/s (4.6 m/s)
  • Motor option 1: 17 ft/s | Motor option 2: 15.1 ft./s
  • Butt Saw Cut Diameter: 815 mm (32 in) | Top Saw Cut Diameter: 560 mm (22 in) | Feed-Roller Opening: 875 mm (34.4 in) | Max. Delimbing Opening: 710 cm (30 in) | Max. Opening Lower Knives: 885 mm (35 in) | Min. Feed Arm Diameter: 65 mm (2.6 in)
  • Butt Saw Bar: 1015 mm (40 in) | Top Saw Bar: 740 mm (29 in)
  • Maximum: 200 cm (79 in)
  • Tank: 16 L (4.2 gal)
  • Butt Saw type: Waratah 3/4 | Top Saw type: .404 | Delimbing knives: 1 fixed,/1 floating, 1 fixed rear
  • 3/4 in
  • 4