2020 Waratah 600 Series 3 And 4 Roller HTH618C

Information

2020 Waratah 600 Series 3 And 4 Roller HTH618C

When you're out in the woods, running back to the shop for a different piece of equipment isn’t always an option. So you want to make sure what you’ve got is up to the job — it's one of the things that makes the Waratah HTH618C so attractive.

Building on the versatility, efficiency, and durability of the HTH616C, the HTH618C adds double bottom knives for increased stem coverage, resulting in improved delimbing or debarking quality (depending on the configuration). Even with additional knives and topping saw, the HTH618C retains a short, robust chassis that can easily be positioned in tight spots while selective thinning or taking on the bent and ugly timber for which this series is famous.

Photos

Highlights

  • TN AR, Mississippi
  • 2020
  • Waratah
  • 600 Series 3 And 4 Roller HTH618C
  • Available
  • Maximum: 63 in (160 cm)

Specifications

  • 2020
  • Waratah
  • 600 Series 3 And 4 Roller
  • HTH618C
  • General
  • Saw type: 0.404 cc | Motor 1: 500 cc / 315 cc | Motor 2: 630 cc / 400 cc
  • Motor 1 Feed — maximum flow: 27 ft./sec (8.3 m/sec) | Motor 2 Feed — maximum flow: 22 ft./sec (6.6 m/sec)
  • Maximum feed roller opening: 27 in (680 mm) | Maximum cutting: 22 in (550 mm) | Bar: 29 in. (750 mm) | Maximum cutting: 22 in (550 mm) | Maximum delimb opening: 28 in (700 mm)
  • 17 in (420 mm)
  • Maximum: 63 in (160 cm)
  • Saw type: Waratah 3/4 | Saw limiting: Available with SuperCut 100 | Top knives: 1 fixed, 2 moving | Bottom knives: 1 fixed, 2 moving