2020 Waratah 400 Series 4 Roller H415HD

Information

2020 Waratah 400 Series 4 Roller H415HD

The rugged H415HD is built to work on your toughest jobs. A heavy-duty tilt frame, feed motors and guarding provide even more durability.

Photos

Highlights

  • TN AR, Mississippi
  • 2020
  • Waratah
  • 400 Series 4 Roller H415HD
  • Available
  • Head open: 67.7 in (1720 mm) | Head closed: 48 in (1220 mm)
  • Without rotator and link: 48 in (1510 mm)

Specifications

  • 2020
  • Waratah
  • 400 Series 4 Roller
  • H415HD
  • General
  • Saw motor: 19 cc or 20 cc
  • Recommended pump capacity: 260 l/min – 340 l/min
  • Operating: 28 Mpa
  • Gross feed force: 400 cc - 630 cc (27 kN) / 500 cc - 780 cc (30 kN) / 1014 cc - 315 cc (25 kN – 42 kN)
  • Maximum feed: 2.9 m/s – 7.0 m/s
  • Maximum roller opening: 26.8 in (680 mm) | Minimum: 2 in (50 mm) | Maximum cut: 28 in (710 mm) | Delimbing tip to tip: 18.1 in (460 mm) | Maximum opening upper knives: 26.8 in (680 mm) | Maximum opening lower knives: 28 in (710)
  • Without rotator and link: 48 in (1510 mm)
  • Saw bar: 900 mm
  • Head open: 67.7 in (1720 mm) | Head closed: 48 in (1220 mm)
  • Tank: 9.0 l
  • Without rotator and link: 3,089 lb (1,401)
  • Delimbing knives: 4 moving, 2 fixed | Control and Measuring System: TimberRite H-16
  • .404 in
  • Drive: 4