Stribling Equipment

Information

2025 John Deere 744 P-Tier

• Net Power: 236 kW (316 hp) at 1,500 rpm

• Operating Weight: 24 907–26 630 kg (54,920–58,709 lb.)

• Bucket Capacity: 3.8–4.5 m3 (5.0–5.85 cu. yd.)

Features may include:

Overview

Production class P-Tier loaders will continue to utilize the durable axles implemented with the K-II series machines. The 744 and 824 P-Tier will continue to use the TMV axles while the 844 P-Tier continues to use the ZF MTL axles.

• Front input bearings and brake discs are pressure lubed, enhancing cooling and extending component life.

• Deeper final drive ratio lowers torque on sun shaft and differential resulting in increased durability.

• Spiral bevel pinion and gears have improvements of 500% and 158% respectively to increase strength and durability.

• Axle shaft diameter and bearing size increased to withstand higher torque.

• Brake retractors and automatic self-adjusters were added to eliminate brake drag and maintain a constant brake running clearance increasing brake compliance, reducing fuel consumption and heat.

• Larger capacity front axle input bearings were added to increase reliability and durability.

• Differential locks are a low-pressure open circuit system that uses axle oil increasing reliability and durability.

Increased functionality with EH controls

Electrohydraulic (EH) controls allow for increased functionality to customize machine operations. Operators can adjust settings based on preference to increase productivity across a range of jobsite applications.

• Enable soft hydraulic stops to select how abrupt the bucket or boom stops when end of travel is reached or when the lever of the joystick is released.

• Personalize both multi-function buttons, incorporated into the joysticks with up to 9 options selectable from the monitor.

• From the factory multi-function 1 is set as kickdown and multi-function 2 is set as the horn

• P-Tier production class loaders may be equipped with low effort, shorter throw single axis controls or joystick controls.

• Set and store up to 10 different attachment configuration settings including flow, responsiveness, and other modes through the monitor for the most frequently used attachments in your fleet.

EH Precision Mode allows fine metering of bucket or boom movement when precision loader functions are required. This scales back on the aggressiveness of the functions during operation as well as limits flow. The feature is best utilized in any application that requires reduced hydraulic function speed such as laying pipe or installing manholes.