2020 John Deere 317G

Selling Price -

$40,000.00

2020 John Deere 317G

Information

  • Operators Station:EH Joystick Controls
  • Attachments:Aux Hydraulics
  • Attachments:Forks
  • Buckets:72" Bucket

Photos

Highlights

  • $40,000.00
  • Richland
  • Pre-Owned
  • 159429
  • 2020
  • John Deere
  • 317G
  • 1T0317GJJLJ372518
  • Model: 4TNV86CHT
  • Available
  • No Bucket: 65.1 inches (1650 mm)
  • Top Of Cab: 78.5 inches (1990 mm) | To Hinge Pin: 121 inches (3070 mm) | Dump - Maximum Foundry: 95.6 inches (2430 mm)

Specifications

  • 2020
  • John Deere
  • 317G
  • Base
  • General
  • Model: 4TNV86CHT
  • Yanmar
  • Rating: Tier 4 / Stage IV
  • 128 Inches³ (2.1 ltr)
  • 2600 rpm
  • Output Net: 61 hp (45.6 kW) | Output - Gross: 65 hp (48.5 kW) | Hydraulic: 33.1 hp (24.729 kW)
  • 153 lbf / ft (207 Nm)
  • Turbo
  • Rated Capacity - Foundry: 2125 lbs (965 kg) | Tipping Load - Foundry: 6070 lbs (2756 kg) | Breakout - Lift Foundry: 5250 lbf (23.3 kN) | Breakout - Bucket Foundry: 6000 lbf (26.6 kN)
  • Maximum: 7 mph (11.3 kph)
  • Pump: 17 gallons US / min (63 lt/min)
  • Ground Bearing - Foundry: 5.5 Psi (38 kPa) | System: 3450 Psi (237.87 bar)
  • Rear Departure Angle: 32.3 Degrees | Dump Angle: 42 Degrees | Rollback - Ground Level: 30 Degrees
  • Shoe: 12.6 inches (320 mm)
  • No Bucket: 103 inches (2630 mm) | Foundry Bucket: 127.6 inches (3240 mm)
  • No Bucket: 65.1 inches (1650 mm)
  • Top Of Cab: 78.5 inches (1990 mm) | To Hinge Pin: 121 inches (3070 mm) | Dump - Maximum Foundry: 95.6 inches (2430 mm)
  • 8.3 inches (210 mm)
  • 52.5 inches (1330 mm)
  • Tank: 19 gallons US (71 ltr)
  • 8423 lbs (3824 kg)
  • Lift Geometry: Vertical